InfiniteLoopy
May 1, 04:47 AM
Regarding MAMP:
If I install in on a Mac which is on a LAN, can other computers on the same network access it or the sites it's hosting?
Can anyone confirm that people can't access it via the web as well? (Just want to be sure that I don't get it messed up or visible before I want it to go live.)
Thanks,
If I install in on a Mac which is on a LAN, can other computers on the same network access it or the sites it's hosting?
Can anyone confirm that people can't access it via the web as well? (Just want to be sure that I don't get it messed up or visible before I want it to go live.)
Thanks,
r0k
Apr 4, 02:58 PM
I used an AExpress to extend my AExtreme wifi. At first I misunderstood and ran a wire to the AE and plugged it in ethernet and told it to extend the wifi. Boy things got fouled up then. I found out after a quick phone call with Apple that I didn't need to run ethernet to the AExpress for it to extend wifi. So I got it set up and then walked upstairs to the hallway between the kids' rooms where they were having spotty wifi coverage. I plugged in the AExpress and it went "green" after only a few moments.
It would be nice if these devices could extend on anothers' wifi but I don't mind having our house "all Apple" as our experience has been relatively trouble free since doing so. I went through several brands of routers before settling on AE. For a while, I even had a Time Capsule as a router. When the ability to set up a guest network became available, I sprung for an AExtreme despite the fact I already had a TC. Past routers we had tried include a Linksys WRT54GS (v5), Zyxel and several others I can't remember. The only things they did better than Apple gear is you could set them up using any web browser and there were a few more flexible settings, but everything else about them was awful.
We use ComCrap internet and the cable modem knocks all our routers for a loop whenever ComCrap decides it's time for us to get a new ip address. All our routers that is until I started using Apple gear. What was once a monthly and sometimes biweekly power cycle ritual has only happened once in 18 months since dumping those other routers. And the one time it did happen, ComCrap admitted they had taken down the service for one of their digital channel scrambling rituals and knocked hundreds of customers off the net.
It would be nice if these devices could extend on anothers' wifi but I don't mind having our house "all Apple" as our experience has been relatively trouble free since doing so. I went through several brands of routers before settling on AE. For a while, I even had a Time Capsule as a router. When the ability to set up a guest network became available, I sprung for an AExtreme despite the fact I already had a TC. Past routers we had tried include a Linksys WRT54GS (v5), Zyxel and several others I can't remember. The only things they did better than Apple gear is you could set them up using any web browser and there were a few more flexible settings, but everything else about them was awful.
We use ComCrap internet and the cable modem knocks all our routers for a loop whenever ComCrap decides it's time for us to get a new ip address. All our routers that is until I started using Apple gear. What was once a monthly and sometimes biweekly power cycle ritual has only happened once in 18 months since dumping those other routers. And the one time it did happen, ComCrap admitted they had taken down the service for one of their digital channel scrambling rituals and knocked hundreds of customers off the net.
Zaid
Sep 28, 06:11 PM
Sounds good :).
If only I had easy access to London.
_Emerson
Open offer mate. I'll even through in the sleeper couch in my living room
If only I had easy access to London.
_Emerson
Open offer mate. I'll even through in the sleeper couch in my living room
dlee96
May 2, 12:53 PM
With the plastic clips, the springs were required to maintain pressure between the heatsink and the CPU. You don't need the springs if you're using screws and nuts. I used nylon screws and nylon lock nuts. I see temps a few degrees lower than yours while encoding. Remember not to use too much thermal paste.
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
I've recently installed a 2.33ghz c2d chip in my old 1.66 cd mac mini. The performance boost has been great!
I've noticed temps have gotten a little high while running encodes and such... around low - mid 90s C while handbrake is encoding. I know this is still within operating temperature, but i'd like them to be a little lower.
I managed to keep the plastic clips from breaking while installing my cpu. I've been thinking about replacing the nylon clips with some nylon screws, like others have mentioned.
My question, Do people use the springs that came with the clips when installing the screws? Or do people just screw the heatsink down snug to the cpu without the springs?
Thanks,
more...
macquariumguy
Sep 3, 11:56 AM
The banner is on eBay now (with about a day left). I'll probably put the poster up next.
TwinCities Dan
Oct 9, 10:18 PM
There are so many, but Rodrigo Y Gabriela are something special... ;) :)
more...
Bond007
Jun 29, 11:39 AM
Yeah. under the iChat prefs. it says 'mic enabled'. I guess i'll have to try a self powered mic, because I know this mic i have works, i tried it out on my roommates PC.:confused:
Another quick question, does anyone know if any USB camera (for net chat) will work with the Powermac? Or do i need something special for that as well>?:confused:
thanks.
Another quick question, does anyone know if any USB camera (for net chat) will work with the Powermac? Or do i need something special for that as well>?:confused:
thanks.
Hellhammer
May 5, 01:15 AM
I would only transfer OS X and apps so in Migration Assistant, simply don't include the users folder and whatever takes a lot space. After migration, move the other data from the other computer/external to the HD.
You can also point your Home folder to the HD which makes managing an SSD and HD pretty easy.
You can also point your Home folder to the HD which makes managing an SSD and HD pretty easy.
more...
JackAxe
Apr 8, 07:00 PM
When the Wii first came out, Nintendo shipped the bulk to the US, since it's the single most important market when it comes to gaming, but the Wii would sell out with in a few hours of it being stocked.
There's been a huge demand for the Wii and Nintendo is currently filling the demand of other regions, so they haven't been able to ship as many to the US.
Anyway, check stores like Target or Best Buy on a Sunday morning. They generally get the biggest shipment of Wiis.
<]=)
There's been a huge demand for the Wii and Nintendo is currently filling the demand of other regions, so they haven't been able to ship as many to the US.
Anyway, check stores like Target or Best Buy on a Sunday morning. They generally get the biggest shipment of Wiis.
<]=)
Encai
Apr 1, 05:44 PM
Hellhammer, just wanted to say thanks for creating the guide! It was very clear and easy for me to follow when I recently upgraded to Snow Leopard.
more...
Night Spring
Mar 14, 01:21 PM
I didn't mean to say that new tool will allow him to downgrade without SHSHs, I meant to say that he is stuck until the new tool is release that can Jailbreak 4.3 and he can get all his stuff back. ;)
Actually, if OP doesn't mind a tethered jailbreak, there are tools available to jailbreak 4.3 right now.
Actually, if OP doesn't mind a tethered jailbreak, there are tools available to jailbreak 4.3 right now.
appleguy123
Oct 3, 08:28 PM
Does anyone have a picture of a splayd?
more...
FireStar
Oct 24, 07:49 PM
^ when claiming work as your own be sure to remove the copyright. :rolleyes:
Genuis.
Thanks.
I changed it. Happy? :)
Genuis.
Thanks.
I changed it. Happy? :)
ucfgrad93
Aug 4, 09:57 AM
Hopefully it won't damage any satellites.
more...
boogieman14
May 6, 11:24 AM
I put on order for the i7 and the 2Gig Video Card, would this machine handle somewhat serious gaming within 2 years time frame,
Melrose
Apr 12, 09:22 AM
I don't see much of a similarity. It's branded as Windows, and you can tell by the ugly colours and UI treatments. Granted, to me it looks a lot more confusing than the App Store, but it's still a basic layout styled for Windows.
The truth is, there aren't a whole lot of different ways to put content on a page and have it organized.
The truth is, there aren't a whole lot of different ways to put content on a page and have it organized.
more...
jamesdav15
Mar 11, 10:54 AM
I'm going go to early, around 10/11. Will let you all know how long the line is.
bedifferent
Mar 16, 11:48 AM
It could mean that, or it could mean they just haven't updated the graphite versions of the buttons/loading bars/etc yet. I would love to see them offer more color options, but I wouldn't be surprised if it ends up being just blue and graphite again. :o
I hope they offer more color options, especially for the sidebar icons. I'm not loving the iTunes 10 UI.
I hope they offer more color options, especially for the sidebar icons. I'm not loving the iTunes 10 UI.
ThunderLounge
Oct 20, 10:05 PM
Quite clever. ;)
gkarris
Apr 2, 08:09 PM
Not limited edition according to Engadget and Joystiq. Worry not.
The version but what about the Black color - is that permanent?
The version but what about the Black color - is that permanent?
amusiccale
Jun 19, 05:14 PM
For sale: Ipod nano, 2nd gen, 4 gig. capacity, works great, like new: no scratches that I know of, screen is nice, has been kept in case or sleeve (from my 1st gen nano) all its life. It's the Product Red color. Comes with 'iwave' black metal case. Despite what the pictures may show, the screen is bright and clear; the red aluminum is uniform in color and rather immaculate.
Includes retail packaging (no headphones unless you're really interested in sharing used ones...), USB cable, documentation, stickers, dock adapter, a number of UPC-ed bags from when I opened it. Package is missing UPC code from last year's back to school promotion for college students. I'm trying to sell my way into an ipod Touch. Also would entertain (crazed?) offers of trade + $ for touch.
I can take pictures if you'd like.
Caveat: It's got the engraving, w/ my name and email address. Plus I guess you can stay in contact with me at all times? The black case covers it.
Please reply with reasonable offers or advice; thanks in advance.
IPOD SOLD
Includes retail packaging (no headphones unless you're really interested in sharing used ones...), USB cable, documentation, stickers, dock adapter, a number of UPC-ed bags from when I opened it. Package is missing UPC code from last year's back to school promotion for college students. I'm trying to sell my way into an ipod Touch. Also would entertain (crazed?) offers of trade + $ for touch.
I can take pictures if you'd like.
Caveat: It's got the engraving, w/ my name and email address. Plus I guess you can stay in contact with me at all times? The black case covers it.
Please reply with reasonable offers or advice; thanks in advance.
IPOD SOLD
musique
Apr 4, 06:48 AM
"Plays nicely with the MAC" doesn't give a lot of information about what you're planning to use to edit on the Mac.
In general, however, most cameras shoot video that is made for playback, not editing. So, if you're planning to use FCP to edit, FCP can import many different formats and convert them to formats made for editing. In addition, there are free and not-free programs that can assist in converting your camera format to an editing format.
If you can provide more information about your needs, you'll probably get more informative responses.
Good luck.
In general, however, most cameras shoot video that is made for playback, not editing. So, if you're planning to use FCP to edit, FCP can import many different formats and convert them to formats made for editing. In addition, there are free and not-free programs that can assist in converting your camera format to an editing format.
If you can provide more information about your needs, you'll probably get more informative responses.
Good luck.
ErikCLDR
Oct 20, 11:45 AM
Maybe I'll go, I am not sure though, depends what I am doing.
And West Farms technically is in Farmington, not West Hartford. I know it gets confusing- West Hartford, Farmington, and New Britain. Kinda like that blur of Simsbury, Canton, and Avon.
And West Farms technically is in Farmington, not West Hartford. I know it gets confusing- West Hartford, Farmington, and New Britain. Kinda like that blur of Simsbury, Canton, and Avon.
hollerz
May 5, 07:33 AM
There should be a -1000 button for threads like these... Or - "Lowest Ranked".
Have some neg rep.
I lol'd!
Have some neg rep.
I lol'd!
No comments:
Post a Comment